help please! :( dme 413 turbo

Discuss Bosch (Porsche, BMW, Volvo, etc) tuning topics here. Request definitions, discuss parameters, etc.

Moderators: robertisaar, dex

Post Reply
bmwe30m50b31
Posts: 14
Joined: Thu Aug 18, 2016 7:17 am

help please! :( dme 413 turbo

Post by bmwe30m50b31 »

I have 525 m50 turbo, I,m going to adjust 413 ecu on my engine. But I can't understan on the ignition map, during the increase meanings when happens spark? Early or late? I need your help very much, I have to place my car on dyno tomorrow. So looking forward for your answer. Thanks beforehand :x
evilm3666
Posts: 72
Joined: Wed Nov 09, 2011 4:31 pm

Post by evilm3666 »

Not real sure what you are asking,but I will give it a shot. The top of the ignition advance and fuel tables are m.s. of load. You need a scanner to view load or you can use the active trace with the moates.net ostrich to see what cell you are referencing at that moment.
bmwe30m50b31
Posts: 14
Joined: Thu Aug 18, 2016 7:17 am

help

Post by bmwe30m50b31 »

I'm interested in early and late spark on the ignition map during the increase numbers. If it is early or late/tardy?
mohamedramli
Posts: 5
Joined: Thu Jan 19, 2017 5:08 pm

Post by mohamedramli »

If you look at the PT ignition table, as the RPM is higher, the number in the cell is higher. Meaning the bigger the number the bigger the ignition advance.
bmwe30m50b31
Posts: 14
Joined: Thu Aug 18, 2016 7:17 am

Post by bmwe30m50b31 »

mohamedramli wrote:If you look at the PT ignition table, as the RPM is higher, the number in the cell is higher. Meaning the bigger the number the bigger the ignition advance.


thank you very much )))))) today I will regulate my ecu and upload link of the dyno video let"s see how much WHP will be, the engine is m50b25 turbo pressure 12psi boosted))))
Post Reply