stock chip for 413/m52

Discuss Bosch (Porsche, BMW, Volvo, etc) tuning topics here. Request definitions, discuss parameters, etc.

Moderators: robertisaar, dex

Post Reply
7808
Posts: 1
Joined: Wed Jun 25, 2014 5:02 pm

stock chip for 413/m52

Post by 7808 »

I put a e36 iron block 2.8 m52 in a e46 , kept stock e46 dme for dash and can bus etc.. and piggy back a 413 silver label for running the motor with obd1 engine harness and intake manifold, its hooked up im just looking for a stock m52b28 file to run the motor, also I clipped the green wire pin 66 at the dme to disable ews. I plan to turbo the engine later I just want to get it running and work out any issues 1st.

I used tuner pro a couple years ago for a m50 motor with a holset turbo, but something went wrong lol lost all compression in cyl #5 im kind of rusty, if I remember right the xdf or something was not %100 accurate. I still have my moates chip burner and a few chips though
evilm3666
Posts: 72
Joined: Wed Nov 09, 2011 4:31 pm

Post by evilm3666 »

Pm me your Email and I will send you a bin file and a xdf.
alimehrem
Posts: 6
Joined: Sun Oct 05, 2014 7:58 am

Post by alimehrem »

can you send me the stock xdf sir ?
my e-mail is eng.alimehrem@hotmail.com
alimehrem
Posts: 6
Joined: Sun Oct 05, 2014 7:58 am

Post by alimehrem »

can any one help me here guys i cant reach any member here !!
alimehrem
Posts: 6
Joined: Sun Oct 05, 2014 7:58 am

Post by alimehrem »

can any one help me here guys i cant reach any member here !!
farjeman
Posts: 11
Joined: Sun Mar 26, 2017 10:13 am

Bump [=

Post by farjeman »

Hi,
If someone is still around... I'm looking for exactly what the OP requested [=
love to have the BIN+XDF also.

Thanks!

vw_b@walla.co.il (worth a shoot..)
evilm3666
Posts: 72
Joined: Wed Nov 09, 2011 4:31 pm

Post by evilm3666 »

Its in the download section.
farjeman
Posts: 11
Joined: Sun Mar 26, 2017 10:13 am

Post by farjeman »

Hi
Thanks evilm3666.
Well.. sorry for being anoying but can you point me for the correct one? I looked through the bin's and couldn't find it :/

Also my situations is little bit different, I'm having an e34 (but also a 413 silver DME), is it matter? maybe a different O2 sensors? I have only 1.

Regards,
User avatar
aboutton
Posts: 180
Joined: Wed Mar 09, 2011 2:04 pm
Location: Lebanon
Contact:

Post by aboutton »

soo freak'n busy lately.

anyone still need help ?
HyperBoost Tuning
Tony Ouneissy
Lebanon
farjeman
Posts: 11
Joined: Sun Mar 26, 2017 10:13 am

Post by farjeman »

Yes :D
I need a map for the stock m52b28 with the m50 intake. Using the silver 413 dme.
1995 e34, previous engine was the m50b25tu.
Thank you.
Post Reply