Filter for min/max values in History tables

Submit feature suggestions for future versions of TunerPro here.

Moderators: Mangus, robertisaar, dex

Post Reply
Matrix
Posts: 28
Joined: Sun Apr 25, 2010 10:58 am

Filter for min/max values in History tables

Post by Matrix »

I would like to see a feature added that sets the range of acceptable values for the history tables. This way, if you are looking at Injector pulse width, you can filter out when you are slowing down and the ECU fuel cut logic cuts the pulse width to zero.
User avatar
EagleMark
Posts: 424
Joined: Mon Mar 22, 2010 11:11 am

Post by EagleMark »

Filters would be awesome! :)
1990 Chevy Suburban
1994 Buick RoadMaSSter Estate Wagon LT1.
1972 IH 1210 Isky Cammed Balenced 345 TBI

GearHead-EFI.com EFI Conversions and Chip Tuners!
JP86SS
Posts: 218
Joined: Thu Apr 22, 2004 5:49 pm
Location: Strongsville, Ohio
Contact:

Filters :)

Post by JP86SS »

As an expansion to this idea if it is considered for implementation.
Have the filter value selectable as one of three types.
a.) Numeric value (Integer or floating point)
b.) Data item value (ex: Speed > xx.xx, selectable from ADX list)
c.) Bit driven (ex: TCC = true, Selectable from ADX list)

Ability for any number of these values, stacked as go/no-go parameter for what goes into the data table display.
Jp
vxl67getrag
Posts: 17
Joined: Thu Apr 07, 2011 8:23 pm

Update for filter

Post by vxl67getrag »

Howdy all,

Just wondering if there is any update to this?

I would like to add a TPS filter to history table for closed throttle & open throttle wideband afr error.
The1
Posts: 33
Joined: Wed Jul 20, 2011 2:41 am

Post by The1 »

just checking up on this also, would be a nice feature to have, would help me tune different load areas easier
Post Reply