RamJet 350

Discuss General Motors (GMC, Chevy, Pontiac, Hummer, Cadillac, etc) tuning topics here. Request definitions, discuss parameters, etc.

Moderators: robertisaar, dex

Post Reply
kenny kustom
Posts: 3
Joined: Tue Jan 08, 2013 3:16 pm

RamJet 350

Post by kenny kustom »

Hello. I am using the mefi burn cable and scan pro software.
When trying to connect, it just says aldl not connected on the bottom of the screen. What am i doing wrong ?
cbernhardt
Posts: 95
Joined: Fri Apr 18, 2008 5:19 am

Re: RamJet 350

Post by cbernhardt »

kenny kustom wrote:Hello. I am using the mefi burn cable and scan pro software.
When trying to connect, it just says aldl not connected on the bottom of the screen. What am i doing wrong ?
Have you set the proper COM port?
If not goto "File", "Preferences", "COM Setup".

Charles
kenny kustom
Posts: 3
Joined: Tue Jan 08, 2013 3:16 pm

Post by kenny kustom »

I did set the com port. I downloaded my stock bin from the dcm onto my laptop. I just cant get the scanner program to connect to it.
kenny kustom
Posts: 3
Joined: Tue Jan 08, 2013 3:16 pm

Post by kenny kustom »

Got it ! I didnt have the adx file loaded.
Managed to upload my modified RamJet tune and
had all the monitors displaying correctly.
cbernhardt
Posts: 95
Joined: Fri Apr 18, 2008 5:19 am

Post by cbernhardt »

Nevermind
Post Reply