BMW 413 xdf files
Moderators: robertisaar, dex
BMW 413 xdf files
If anyone needs it I just finished a very complete xdf for the 413 red label ecu with #623 chip and a xdf for 413 silver ews II ecu chip#715.
It has everything you should need with all the rpm and load break points correct,working rev limiter, maf scaled correct in kg/hr, working idle speed, ect.
They started out as the ones from tunerpro.net with a lot of changes and updates. Thanks to aboutton for the rev limit location and Revlimit for a excellent file to start with and anyone I may have missed.
If any one needs it pm me you email and I will send it.
It should also be on tunerpro.net at some point.
It has everything you should need with all the rpm and load break points correct,working rev limiter, maf scaled correct in kg/hr, working idle speed, ect.
They started out as the ones from tunerpro.net with a lot of changes and updates. Thanks to aboutton for the rev limit location and Revlimit for a excellent file to start with and anyone I may have missed.
If any one needs it pm me you email and I will send it.
It should also be on tunerpro.net at some point.
Last edited by evilm3666 on Wed Jan 02, 2013 10:55 am, edited 1 time in total.
good old raul, i havent heard that name in a while lol
this news makes me want to buy an E36 just so i can play with it
@ngt, there was someone i helped a while ago that was into computer programming, he made a checksum corrector that worked on a few types of motronic bin files. i dont think the program covered the 413 but if he knew the checksum areas, etc. he might be persuaded to either add to the existing program or make one for the 413.. if you want to ask him you can contact him via his website www.iroot.ca
this news makes me want to buy an E36 just so i can play with it
@ngt, there was someone i helped a while ago that was into computer programming, he made a checksum corrector that worked on a few types of motronic bin files. i dont think the program covered the 413 but if he knew the checksum areas, etc. he might be persuaded to either add to the existing program or make one for the 413.. if you want to ask him you can contact him via his website www.iroot.ca
EthosMotorsports
thank you so much for getting the rev limiter functioning, just discovered the updated xdf and loaded it, now for the $64,000 question what's the correct # for 7000 rpm? I have been running a euro spec m88/3 on a 413 for several months and the 6500 rpm limit is annoying, tried a couple of the numbers from the 413 rev limit thread and they either let me go past 7500 or hit at 2k, haven't quite wrapped my head around calculating the #
-
- Posts: 3
- Joined: Thu Aug 29, 2013 8:01 am
-
- Posts: 3
- Joined: Thu Aug 29, 2013 8:01 am