Xtronics Romulator chip size emulating bug

Report bugs found in TunerPro. Please be sure to include as much info as possible, including system specs, OS, repro steps and TunerPro version number.

Moderators: Mangus, robertisaar, dex

Post Reply
JPrevost
Posts: 8
Joined: Thu Feb 12, 2004 3:48 am

Xtronics Romulator chip size emulating bug

Post by JPrevost »

Okay, so I've had my pocket romulator for some time now and it was working GREAT... until I changed it's settings to emulate a larger eprom (from a 2732). So I couldn't find the romulator software on my computer for like 10 minutes of looking so I gave up and thought that TunerPro would work. I open TunerPro and it finds the romulator, awesome, but then it doesn't work. I upload a 4k bin (2732 sized) and plug it into my zifed 8746 ecm. The 1st 4 pins aren't used and just overhang. Well it doesn't work. Turns out you need to set the chip size using xtronics romulator software.
So TunerPro master, I think there needs to be an update :) .
Just read the bin file size and if it's 4k, set the romulator accordingly. Very easy unless you're using a bin stacker and/or flash chip adaptor.
, Jon Prevost from thirdgen.org 91 camaro and still TBI with a mild 350 well into the 13's street trim and daily driven
User avatar
Mangus
TunerPro Author
Posts: 1918
Joined: Wed Mar 19, 2003 1:49 pm

Post by Mangus »

See my reply at Thirdgen.
***************************************
TunerPro Author
1989 Trans Am
Post Reply