TunerPro User Forum

I'm new to this so please take it easy on me.

I have found 4 bin files and 1 XDF file to suit 748, 916 and 996.

I have started looking at the files while I await delivery of my EPROM Burner and Chips.

When I look at the files, 2 of the files have the tables nicely sorted in order and the other 2 are not sorted. So when I go to look at them in the 3D graph mode they are impossible to understand.

Am I doing something wrong?

Do I need a different XDF file for each bin file?

To see screen shots follow links below.

Thank you in advance.


http://www.ducati-superbikes.com/forum/ ... ureid=4195

http://www.ducati-superbikes.com/forum/ ... ureid=4194

Hello , i`m new here in this forum.
First : Thank`s Mark for this great program !
I work with the Ducati ECU`s sinse 1990.
Now i write my maps with a sort of autotuneprogram,based
on AFR target .My little program works very well with Tuner Pro.
So i can drive on road or dyno, log AFR, push button and get
the corrected map.

@ Deckside
For all the Ducati bin files you need differrent XDF file.
I can help with all XDF files for P7,P8 and 16M.
Send me your bin and i give you the correct XDF file.

Now i try to write XDF files for 59M and 5AM ECU`s.
In this case i think i need a little help.

Greatings from Germany
Axel

Hey Deckside,
You shouldn't need different XDF files unless they are for different ECU's.
I did find a similar thing when looking at different .bin files.
Open one that you think doesn't look right, then click on;
XDF\View/Edit XDF Headder Info\ - then change Base Offset from or to 0000
or 0001 (Whichever your's isn't)
Then re-open the table and look again...

Excellent that works

Thanks

hello where I can find xdf for Ecu p8 thanks

So are you guys using 64kb xdf files or 32kb?