Joined: 18 May 2008
|Posted: Sun May 18, 2008 4:05 pm Post subject: Working on new $0D adx file.
|Hello, I'm new to this forum. Been reading some here the last couple days, and have just gotten my new $0D adx file to work, so I thought I would take a brake and sign up.
There were two small issues I ran across with getting it working. Also it's probably worth pointing out that my adx only connects and displays RPM at this point. Doesn't seem like much, but I hadn't worked with ads or adx files before, and had no ideal what I was doing.
The two issues were:
1. Creating new Send/Reply command. At first I named the unique ID the same as the Title. This didn't pop-up a era message when I saved. When I would attempt to connect to PCM, it wouldn't work. When I inspected the command settings, I would find the Process Reply unchecked. So I would check the box and save, then when I would inspect the settings again, it would be unchecked again. Wouldn't stay checked.
2. This one is same as above, except has to do with the description box. If I would put anything in this box, I would have the same problem as above.
I hope this isn't being too nick-picky. I know that SP is still under development, I just thought you might want to know and was hoping that this wouldn't trip someone else up.