Oscilloscope specs
Moderators: Mangus, robertisaar, dex
Oscilloscope specs
I've been looking at osiliscopes, just for troubleshooting EFI system conversions I do. Wondering what specs to look for? Don't need anything fancy just don't want to be checking a wire say near a spark plug wire and burn it up! :doh2:
I've found one that is powered by USB and is very small, pocket size whoch would be handy and portable. It also has a probe to pinpoint the area in question. Last time I played with one was high school a looooong time ago and until now have never seen one other than very large benchtop type...
I've found one that is powered by USB and is very small, pocket size whoch would be handy and portable. It also has a probe to pinpoint the area in question. Last time I played with one was high school a looooong time ago and until now have never seen one other than very large benchtop type...
- Six_Shooter
- Posts: 590
- Joined: Sun May 06, 2007 7:32 am
Which one have you found?
I've been eyeing up a PC based one that is from Circuit-test.
http://www.rpelectronics.com/Data/Thumb ... O-3XXX.JPG
It's about $500 from a local brick and mortar store, but I'm sure it can be found cheaper online.
I too want to use mine for same or similar uses.
I've been eyeing up a PC based one that is from Circuit-test.
http://www.rpelectronics.com/Data/Thumb ... O-3XXX.JPG
It's about $500 from a local brick and mortar store, but I'm sure it can be found cheaper online.
I too want to use mine for same or similar uses.
Actually, you need higher resolution if you're looking for spikes. I highly recommend any of the Fluke portables with at least 50Mhz.
Dave
Dave
NismotronicSA Tuning Package/Powered by TunerCodeSA
Speed-Density Tuning for Nissans
Speed-Density Tuning for Nissans
- Six_Shooter
- Posts: 590
- Joined: Sun May 06, 2007 7:32 am
Yeah, I'd love me a Fluke O-scope. My Fluke DMM, was WELL used when I got it about a decade ago, and is still going strong. In fact it's the one I used for work.
I'm in the same boat, the Fluke O-scope pricing is out of my budget, for my own personal use. Until I need something like that for work, I'll look at the cheaper models.
Glenn, posting a link for a tool like this is not against any forum rules that I have seen.
I'm in the same boat, the Fluke O-scope pricing is out of my budget, for my own personal use. Until I need something like that for work, I'll look at the cheaper models.
Glenn, posting a link for a tool like this is not against any forum rules that I have seen.
Never liked the Fluke scopes. They make great meters, but their scope is very lacking. Look at Tektronix for O-scopes.
Dave
http://www.geocities.com/revconprince/index.html
502 Edelbrock/Howell MPFI Thorleys and Magnaflows - in a 13Klbs motorhome!
"There are 10 types of people in the world, those who understand binary and those who don't"
http://www.geocities.com/revconprince/index.html
502 Edelbrock/Howell MPFI Thorleys and Magnaflows - in a 13Klbs motorhome!
"There are 10 types of people in the world, those who understand binary and those who don't"
For a lab scope, a Tektronix is great, but for portability (I use mine in and around the car) and ease of use, the Fluke is the way to go. Plus, they hold their value well.
Dave
Dave
NismotronicSA Tuning Package/Powered by TunerCodeSA
Speed-Density Tuning for Nissans
Speed-Density Tuning for Nissans
Have you seen this series:
http://www.handheldoscilloscope.net/tek ... lloscopes/
This is what I use for field service. Several storage modes and programmable presets. Much better than the bulkier units that have all the knobs on them, but don't do much.
http://www.handheldoscilloscope.net/tek ... lloscopes/
This is what I use for field service. Several storage modes and programmable presets. Much better than the bulkier units that have all the knobs on them, but don't do much.
Dave
http://www.geocities.com/revconprince/index.html
502 Edelbrock/Howell MPFI Thorleys and Magnaflows - in a 13Klbs motorhome!
"There are 10 types of people in the world, those who understand binary and those who don't"
http://www.geocities.com/revconprince/index.html
502 Edelbrock/Howell MPFI Thorleys and Magnaflows - in a 13Klbs motorhome!
"There are 10 types of people in the world, those who understand binary and those who don't"
No, I didn't know Tek made hand-helds. Looks like a fine machine.
Thanks,
Dave
Thanks,
Dave
NismotronicSA Tuning Package/Powered by TunerCodeSA
Speed-Density Tuning for Nissans
Speed-Density Tuning for Nissans
Been looking at the Pawn shops for awhilke and found this! Since it's for automotive use and the newest model from Mac tools I figure it would serve my needs. At 1/7th the cost of $2800. not a bad deal either...
Ahh no pictures here... anyway Mac ET 3480
http://coloradok5.com/forums/attachment ... 1296762043
Ahh no pictures here... anyway Mac ET 3480
http://coloradok5.com/forums/attachment ... 1296762043