Knock count for 0D Mask

daveinet · Joined: 07 Apr 2008 Posts: 36

Does anyone have the packet offset for the knock counter for the 0D mask. This is a 16197427 ECM. Apparently this data is missing from the bin def for TunerPro, which means I can't get this info with ScannerPro either. TTS will give me a knock count, so I assume it exists, but it is missing from the bin def for TunerPro or ScannerPro.
_________________
Dave
http://www.geocities.com/revconprince/index.html
502 Edelbrock/Howell MPFI Thorleys and Magnaflows - in a 13Klbs motorhome!

"There are 10 types of people in the world, those who understand binary and those who don't"

honken · Joined: 15 Dec 2004 Posts: 111 Location: sweden

Tunerpro rt
Byts number :56
Item size : 8bit
Operatiobn : multiply
Faktor :0.175781
Offset :0.00000
Unit label :degrees

daveinet · Joined: 07 Apr 2008 Posts: 36

Thanks, I've programed it, hopefully I'll have a chance to see if it works tomorrow.
_________________
Dave
http://www.geocities.com/revconprince/index.html
502 Edelbrock/Howell MPFI Thorleys and Magnaflows - in a 13Klbs motorhome!

"There are 10 types of people in the world, those who understand binary and those who don't"

daveinet · Joined: 07 Apr 2008 Posts: 36

Well, I tried it, but something is not right. It does not ever increment the count. One other weird thing is that the knock retard never shows either. I assume that there is knock on occasion as TTS will show a count as well as show an amount of retard anytime I accelerate.
_________________
Dave
http://www.geocities.com/revconprince/index.html
502 Edelbrock/Howell MPFI Thorleys and Magnaflows - in a 13Klbs motorhome!

"There are 10 types of people in the world, those who understand binary and those who don't"

honken · Joined: 15 Dec 2004 Posts: 111 Location: sweden

Look in your inbox.

Myles57 · Joined: 09 Aug 2010 Posts: 4

I'm running the same... 16197427 ECM
Did you get the knock count to work? How? I'm new at this... How do I "program" the OD mask as you indicated? Thx

daveinet · Joined: 07 Apr 2008 Posts: 36

$0E instead of $0D. Had the wrong Mask. Honken sent me a defintion that was closer than what I had, but I later discovered I had the wrong mask. Once I used the correct mask, everything works. It may be a while before i can give a specific answer. My computer blew the hard drive and I have as of yet to get TP back installed again.
_________________
Dave
http://www.geocities.com/revconprince/index.html
502 Edelbrock/Howell MPFI Thorleys and Magnaflows - in a 13Klbs motorhome!

"There are 10 types of people in the world, those who understand binary and those who don't"

	TunerPro User Forum Forum Index -> ScannerPro Beta Discussion	All times are GMT - 9 Hours