Knock count for 0D Mask

For those of you brave enough to try the beta releases, please ask your questions and post your issues here! Remember, the more info the better!

Moderators: robertisaar, dex

Locked
User avatar
daveinet
Posts: 36
Joined: Mon Apr 07, 2008 2:04 pm
Contact:

Knock count for 0D Mask

Post by daveinet »

Does anyone have the packet offset for the knock counter for the 0D mask. This is a 16197427 ECM. Apparently this data is missing from the bin def for TunerPro, which means I can't get this info with ScannerPro either. TTS will give me a knock count, so I assume it exists, but it is missing from the bin def for TunerPro or ScannerPro.
Dave
http://www.geocities.com/revconprince/index.html
502 Edelbrock/Howell MPFI Thorleys and Magnaflows - in a 13Klbs motorhome!

"There are 10 types of people in the world, those who understand binary and those who don't"
User avatar
honken
Posts: 111
Joined: Wed Dec 15, 2004 6:05 am
Location: sweden

Post by honken »

Tunerpro rt
Byts number :56
Item size : 8bit
Operatiobn : multiply
Faktor :0.175781
Offset :0.00000
Unit label :degrees
User avatar
daveinet
Posts: 36
Joined: Mon Apr 07, 2008 2:04 pm
Contact:

Post by daveinet »

Thanks, I've programed it, hopefully I'll have a chance to see if it works tomorrow.
Dave
http://www.geocities.com/revconprince/index.html
502 Edelbrock/Howell MPFI Thorleys and Magnaflows - in a 13Klbs motorhome!

"There are 10 types of people in the world, those who understand binary and those who don't"
User avatar
daveinet
Posts: 36
Joined: Mon Apr 07, 2008 2:04 pm
Contact:

Post by daveinet »

Well, I tried it, but something is not right. It does not ever increment the count. One other weird thing is that the knock retard never shows either. I assume that there is knock on occasion as TTS will show a count as well as show an amount of retard anytime I accelerate.
Dave
http://www.geocities.com/revconprince/index.html
502 Edelbrock/Howell MPFI Thorleys and Magnaflows - in a 13Klbs motorhome!

"There are 10 types of people in the world, those who understand binary and those who don't"
User avatar
honken
Posts: 111
Joined: Wed Dec 15, 2004 6:05 am
Location: sweden

Post by honken »

Look in your inbox.
Myles57
Posts: 4
Joined: Mon Aug 09, 2010 3:04 pm

Post by Myles57 »

I'm running the same... 16197427 ECM
Did you get the knock count to work? How? I'm new at this... How do I "program" the OD mask as you indicated? Thx
User avatar
daveinet
Posts: 36
Joined: Mon Apr 07, 2008 2:04 pm
Contact:

Post by daveinet »

$0E instead of $0D. Had the wrong Mask. Honken sent me a defintion that was closer than what I had, but I later discovered I had the wrong mask. Once I used the correct mask, everything works. It may be a while before i can give a specific answer. My computer blew the hard drive and I have as of yet to get TP back installed again.
Dave
http://www.geocities.com/revconprince/index.html
502 Edelbrock/Howell MPFI Thorleys and Magnaflows - in a 13Klbs motorhome!

"There are 10 types of people in the world, those who understand binary and those who don't"
Locked