Support for other programmers?
Moderators: Mangus, robertisaar, dex
-
Greenbuggy
- Posts: 8
- Joined: Wed Jan 12, 2005 4:15 pm
- Location: ISU
- Contact:
Support for other programmers?
Seeing as how the moates APU is supported, I'd really like to see another burner supported - the transtronics pocket programmer II. I ended up buying that one because its got a lot more capabilities than the moates Burn1 or APU's burning capability. Any possibility of this happening?
'51 Ford F-6 Dually Dumptruck/'72 Cheyenne20/'59 VW Chassied Buggy/'85 Honda Prelude/'91 Nissan Maxima
Check out my site at Http://www.speedyoldtruck.com
Always looking for Caddy N* information, working on a tunable OBD1 ECU.
Check out my site at Http://www.speedyoldtruck.com
Always looking for Caddy N* information, working on a tunable OBD1 ECU.
The Moates burners are supported because the protocol is documented. I don't know anything about how the PPII works, which makes it difficult to write software for it.
Not only that, but the PPII is very timing sensitive, and for that hardware the timing must happen on the PC side. I don't want to have to deal with that. =(
Not only that, but the PPII is very timing sensitive, and for that hardware the timing must happen on the PC side. I don't want to have to deal with that. =(
***************************************
TunerPro Author
1989 Trans Am
TunerPro Author
1989 Trans Am