How to force TCC to unlock when WOT

Discuss General Motors (GMC, Chevy, Pontiac, Hummer, Cadillac, etc) tuning topics here. Request definitions, discuss parameters, etc.

Moderators: robertisaar, dex

Post Reply
ss95
Posts: 1
Joined: Wed Jun 17, 2015 12:33 pm

How to force TCC to unlock when WOT

Post by ss95 »

My vehicle info is
1994 S-10 CPI 4L60
BHRH with PCM 16197427
I am using the bin for BHRH and Advanced $0D v200.XDF with APU1 and have been able to load and read from the ecm and datalog.

This S-10 is mainly a play toy to take to the local 1/8 mile drag strip. It is currently a stock motor with a beefed up stock rebuilt trans and Nitrous. My best ET so far is a 7.67 @ 89mph.

I am trying to figure out a way so that when I am racing to disable the lock up convertor but when I'm driving normal it works like stock. I know I can add a switch to do this but I was hoping there is a way to adjust this in the BIN file. Anyone have any ideas or suggestion?
JP86SS
Posts: 218
Joined: Thu Apr 22, 2004 5:49 pm
Location: Strongsville, Ohio
Contact:

Post by JP86SS »

Put the switch under the gas pedal!
or a TPS adjustable trigger to a relay would make it adjustable :)
Image
Post Reply