Ross-tech interface

Discuss anything TunerPro related.

Moderators: Mangus, robertisaar, dex

Post Reply
osamstopedeset
Posts: 1
Joined: Tue Dec 27, 2016 12:02 pm

Ross-tech interface

Post by osamstopedeset »

Hello people. I am new to tuner pro, and i want to flash my m4.4 ecu. i have a ross tech interface and am having trouble flashing. I sellected the right port, did evrything, but cant flash. so could it be the cable. if i go to settings, data aqusition and logging, set it to com port 2, and test , it says its a bad interface. dose flashing and logging use the same type of interface? it looks like i will have to order a chepo chines cable and be done with it.
but i would like to flash as soon as possible. and not wait 2-4 weeks :S
Leofury77
Posts: 2
Joined: Sat Feb 25, 2017 10:54 am

Post by Leofury77 »

Uncheck boot in intelligent mode on vcds
Post Reply