Hi all im trying to create a tuner pro definition but the table keeps looking completely wrong.If i post up some data of one of my map locations can someone show me how to make table in xdf with the data?
thanks john
http://rapidshare.com/share/9A61AB0BD37 ... 01E06D59DE
heres the image of the data i have.[/img]
tryin to create tunerpro definition
Moderators: robertisaar, dex
Try this:
There's a very rough xdf here - I've only 'cleaned up' table C0CA, and there's probably a few mis-labelled axis but thought it might help...
Code: Select all
<XDFTABLE uniqueid="0xC0CA" flags="0x0">
<title>0xC0CA 12x6 RPM Load </title>
<CATEGORYMEM index="0" category="1" />
<XDFAXIS id="x" uniqueid="0x0">
<EMBEDDEDDATA mmedelementsizebits="8" mmedmajorstridebits="-32" mmedminorstridebits="0" />
<units>RPM</units>
<indexcount>12</indexcount>
<outputtype>2</outputtype>
<datatype>6</datatype>
<unittype>4</unittype>
<DALINK index="0" />
<LABEL index="0" value="1000" />
<LABEL index="1" value="1240" />
<LABEL index="2" value="1520" />
<LABEL index="3" value="1760" />
<LABEL index="4" value="2000" />
<LABEL index="5" value="2240" />
<LABEL index="6" value="2520" />
<LABEL index="7" value="2760" />
<LABEL index="8" value="3000" />
<LABEL index="9" value="3240" />
<LABEL index="10" value="3520" />
<LABEL index="11" value="3720" />
<MATH equation="X">
<VAR id="X" />
</MATH>
</XDFAXIS>
<XDFAXIS id="y" uniqueid="0x0">
<EMBEDDEDDATA mmedelementsizebits="8" mmedmajorstridebits="-32" mmedminorstridebits="0" />
<units>Load</units>
<indexcount>6</indexcount>
<outputtype>2</outputtype>
<datatype>23</datatype>
<unittype>24</unittype>
<DALINK index="0" />
<LABEL index="0" value="28" />
<LABEL index="1" value="48" />
<LABEL index="2" value="68" />
<LABEL index="3" value="84" />
<LABEL index="4" value="98" />
<LABEL index="5" value="112" />
<MATH equation="X">
<VAR id="X" />
</MATH>
</XDFAXIS>
<XDFAXIS id="z">
<EMBEDDEDDATA mmedtypeflags="0x04" mmedaddress="0xC0E0" mmedelementsizebits="8" mmedrowcount="6" mmedcolcount="12" mmedmajorstridebits="0" mmedminorstridebits="0" />
<decimalpl>1</decimalpl>
<min>0.000000</min>
<max>255.000000</max>
<outputtype>1</outputtype>
<MATH equation="(X*.75)-22.5">
<VAR id="X" />
</MATH>
</XDFAXIS>
</XDFTABLE>
-
- Posts: 8
- Joined: Thu Jun 12, 2014 2:12 am
hi
hi thanks for helping ill post how far ive got am stuck with the maf maps and the injector scaling. please have a look and see what you think
https://www.dropbox.com/s/my5g0lgzu023n ... d%20up.rar.
any help would be great ive come so far with this.
https://www.dropbox.com/s/my5g0lgzu023n ... d%20up.rar.
any help would be great ive come so far with this.
-
- Posts: 8
- Joined: Thu Jun 12, 2014 2:12 am
I've had a very quick look at the code, and I think the MAF maps might be at 0xB100 (256x1) and 0xB000 (256x1).
These values are read during the ADC interrupt routine and then used as factors in a multiplication function, it's certainly not a temperature sensor calculation so guess it's probably the MAF
These values are read during the ADC interrupt routine and then used as factors in a multiplication function, it's certainly not a temperature sensor calculation so guess it's probably the MAF
-
- Posts: 8
- Joined: Thu Jun 12, 2014 2:12 am
dont look right
ive put those into the xdf and they look bizare?