For other motorcycles we can do a lot with Tuner Pro.
I only tune Italian bikes.
For all the eprom bikes like some Aprilia and MV there is a solution.
For the OBD bikes you can use Tuner Pro also.
But for this we need a OBD flasher.
But this also works.
So if there are any things to discuss lets go.
MV, Gilera, Aprilia,Piaggio,Moto Guzzi, Moto Morini and even
Ducati.
Can help with some XDF.
Need only the bin for exactly the bike for that it is.
First post
-
- Posts: 1
- Joined: Wed Jul 31, 2013 4:30 pm
Re: First post
Hey 916.916 RS wrote:For other motorcycles we can do a lot with Tuner Pro.
I only tune Italian bikes.
For all the eprom bikes like some Aprilia and MV there is a solution.
For the OBD bikes you can use Tuner Pro also.
But for this we need a OBD flasher.
But this also works.
So if there are any things to discuss lets go.
MV, Gilera, Aprilia,Piaggio,Moto Guzzi, Moto Morini and even
Ducati.
Can help with some XDF.
Need only the bin for exactly the bike for that it is.
Do you think that you can help me out with an XDF for my 06 ST3s Duc? I have a bin but I'm a total noob.
Thanks,
Rob
Wow sorry RS, did not realize I posted so long ago. Thats what having a baby will do to you plus a very long cold winter.
Anyways I did a adjustment on my balance and CO settings but that did not seem to help. Comparing to other maps (all IAW15M) my acceleration enrichment is way up and my engine temp trim is different.
Anyway to send the bin to you that I am looking at?
Anyways I did a adjustment on my balance and CO settings but that did not seem to help. Comparing to other maps (all IAW15M) my acceleration enrichment is way up and my engine temp trim is different.
Anyway to send the bin to you that I am looking at?
Re: First post
Hi,916 RS wrote:For other motorcycles we can do a lot with Tuner Pro.
I only tune Italian bikes.
For all the eprom bikes like some Aprilia and MV there is a solution.
For the OBD bikes you can use Tuner Pro also.
But for this we need a OBD flasher.
But this also works.
So if there are any things to discuss lets go.
MV, Gilera, Aprilia,Piaggio,Moto Guzzi, Moto Morini and even
Ducati.
Can help with some XDF.
Need only the bin for exactly the bike for that it is.
I own an Aprilia ETV 1000 with Sagem MC1000 ECU.
For editing fuel maps, ignition maps and for doing
some maintenance work there is a software called TuneEcu.
Unfortunately, that software gives no access to any
fuel correction table, e.g. engine temperature, air temperature,
air pressure, ...
Since the engine is getting too lean with increasing
engine and air temperatures I need to have access to these
correction tables.
To make long story short: Does anyone out there have an
XDF for the Sagem ECU?
As far as I know, the MC1000 has also been used on Triumph
and MuZ bikes.
Oder direkt an Dich, 916 RS: Kannst Du evtl. aus einer
aus der ECU extrahierten BIN-Datei eine XDF erzeugen?
Greetz, Mathias