New to TunerPro, here is my mission..

Discuss Bosch (Porsche, BMW, Volvo, etc) tuning topics here. Request definitions, discuss parameters, etc.

Moderators: robertisaar, dex

Post Reply
928GUY
Posts: 3
Joined: Mon May 06, 2013 8:41 am

New to TunerPro, here is my mission..

Post by 928GUY »

I am being asked to capture BIN files from a stack of ECUs for comparison in a college project, where 'tuning' is the project goal in a summer school project.

I will have these allowable ECUs in the cars:
0 261 200 153
0 261 200 173
0 261 200 351
0 261 200 380
0 261 200 382
0 261 200 524
0 261 200 525
0 261 200 526

I have a GQ-4X reader, and I believe I am capturing the BIN files correctly (I end up with 32k BIN files). I am yet to confirm if I am doing that step properly yet.

BUT..do I need to locate a separate XDF file for each CPU model? Is there a good SINGLE file I can use to review each student groups work at the end of term?

I have loaded this XDF:
http://www.tunerpro.net/download/bindef ... _sw705.xdf

And the 32k bin file I read from an ECU chip..

And all of my fuel maps cells are "255", so clearly, Ive bunged something up. :)

Thank you all, and I look forward to learning in this community.



:P
Guybrush
Posts: 18
Joined: Mon Dec 19, 2011 10:45 pm

Post by Guybrush »

Every single cpu has its own xdf file.

So,when you see 255 at cells means that this xdf is for another cpu with different address memories.

But there is a possibility for an xdf to match with 1 or 2 bins only when is for the same car,model etc.
928GUY
Posts: 3
Joined: Mon May 06, 2013 8:41 am

Post by 928GUY »

Got it..so that complicates the mission, because there are a # of BMW supplied ECUs, but I cant find XDFs for all of them.

Thanks.
Guybrush
Posts: 18
Joined: Mon Dec 19, 2011 10:45 pm

Post by Guybrush »

928GUY wrote:Got it..so that complicates the mission, because there are a # of BMW supplied ECUs, but I cant find XDFs for all of them.

Thanks.
Post the ori file(bin) here if you want and i will try to make the xdf file you want :wink:
taiajam
Posts: 37
Joined: Sun Aug 31, 2008 2:15 pm

Post by taiajam »

Do you have the original file of the 0 261 200 380 ECU?
I need i, i can help u with your school project
Post Reply