mark time/position in log file, during recording?

Discuss anything TunerPro related.

Moderators: Mangus, robertisaar, dex

Post Reply
schwad
Posts: 5
Joined: Sun Sep 09, 2012 7:07 am

mark time/position in log file, during recording?

Post by schwad »

Hi,

Is there a way to mark a position in the log file during recording, simply by pressing a key on my laptop? E.g. Space, Enter, etc.

Reason I ask: I'm trying to figure out what parameters of my engine are associated with my check engine light coming on while driving. (Comes on for ~1min under certain driving conditions.) If I could make a mark indicating "check engine light came on here" I could look at the log later and figure out what happened.

Thanks,
Andrew
JP86SS
Posts: 218
Joined: Thu Apr 22, 2004 5:49 pm
Location: Strongsville, Ohio
Contact:

Post by JP86SS »

Not that I know of currently but this has been suggested.
I usually will hit the throttle hard 3 times to mark the event so I can locate it later.
thats the only thing I could think of that is easy to spot.
Jp
Image
Post Reply