TunerPro User Forum

Found the problem! After many bottles of advil, I found that the vacuum hole in the carb plate was stopped up. After blowing it out, soaking it in carb bath and going to the witch doctor down on the bayou, no vac. After finding no matches in the junk yard, I started to think of a way around this. My...

Hey someone just gave me a 1998 528i that set in the garage for 3 years. Redid the oil, trans and gas just to be sure I didn't grind on old grit and bad gas. Threw in a new battery to see what sounds I would get. WOW, turned over once and purred like a kitten. Is there any xdf or bin files for this ...

OK guys, That got me to thinking. ran the engine to 2000 RPM to see what happens. TPS = .92 volts o2 = 1012.18 MAP = 2.39 volts VAC sensor - 2.98 volts 70 degrees here and raining 4.80 barometric I am getting a error 33 Map high and 45 o2 rich. Now I am totally confused. shouldn't TPS get higher wit...

My 1989 chevy 2.5 has a code 33 that I cant figure out. I have TP giving me good info (Thanks to Robert). I Found the fuel pressure was 4lbs over the 13 # max and the tps was out of bounds. replaced the tps and the fuel regulator. Runs a lot better now. while idling, I get 38.13 map load and 4.78 ma...

I am using $48 XDF to data log. connects great but I get data all over the place. Would the wrong xdf cause this?

I found a post about a celebrity logging problem from a user called 88chevyceleb. EagleMark sent him a file that fixed his problem, but he did it off line. I sent a message hoping he can send it to me. I hope it is the adx file giving problems. Well it is dark here in slidell Louisiana and all I nee...

EagleMark
can I get that file you sent to him off board. I have the same car one year latter and can't find it. thanks

I think I have a problem. I found that I can connect with some xdf files without the cable. What could cause this? Bad port or bad cable.

Thanks for the help on this. This is fun if I can find the right adx. well it looks like a055 is not the one. I tried $70 with a nogo. I will search the sites for somemore and try as I go.
Thanks again

what does the connect really mean? That it sees the ecu or it sees the ADX?

Ok I downloaded a055 with ads extension. I imported def to adx and loaded. no connection. I found a vr_$11_vi.01.adx and I get connection but no data with key on or running. I tried both with and without 10k resistor. I least I saw a dashboard. Closer than I was yesterday. I don't need the bin and x...

Thanks for the reply.
No I did not load a adx. I looked but can only find a $70. will that work?

I have a celebrity eurosport with a 2.5 4CYL motor that runs rich it Idle. I would like to log data to see what goes on in the belly of the best. I ran TunerPro and set the comport to 3 to match the hardware. loaded ablt673048.bin and $48.xdf. Cable checks good. when I click the arrows to load data ...