TunerPro User Forum

Turbosport

Mangus wrote:That's a bad practice on your part. The files are fine, as you can prove yourself by opening them in a plain text editor.

Right-click, save link as.

ok I'll update my help files, would be nice if they all behaved the same though.

Turbosport

I have always just clicked the link and copied the text into a text file with an xdf extension.

Works on some now not others, so some are formatted differently.

Doesn't everyone just click the link and copy ?

Turbosport

and why are my image tags not working ?

Turbosport

This is a screen shot of the link clicked directly -

By the way a guy I was helping with an xdf spotted this, I just thought I woudl follow it up so its not just me

Turbosport

Mangus wrote:Those screenshots look fine to me, clearly showing that lines are broken. Also, view them in your favorite hex editor and note that they clearly have line breaks.

Sorry they are not screen shots they are page source screen shots hold on.

Turbosport

Not in chrome on both Windows 10 or MAC ?? Here is what I get in page source, so the files are in a different format: http://media2.turbosport.co.uk/2013/11/2016032822528086921Screen Shot 2016-03-28 at 21.51.26.png http://media2.turbosport.co.uk/2013/11/2016032822527105270Screen Shot 2016-03-28 at 2...

Turbosport

Looks like a lot of our xdf files have been uploaded without a text/ascii mode enabled on the ftp client and so have lost their line breaks, for instance: This one is fine: http://www.tunerpro.net/download/bindefs/Volkswagen/Golf_VR6_ecu117_soft529.xdf this one has lost its line breaks http://www.tu...

Turbosport

Email me your Bin, the one on the downloads does not work for lots of chips and does not deal with the checksum.

Turbosport

What xdf file are you using ?

Turbosport

What bin file ?

Turbosport

Yes still a real pain

Turbosport

This is the same as my issue I posted.

Turbosport

Yes 8.1 - I went to America for a week and forgot about this !

Turbosport

Let me create a video and send you the link.

Turbosport

I keep my xdf files in different folders, on the latest build if I have an xdf loaded and then goto load another is throws a annoying error saying that the current loaded xdf is not found.

Clint

Turbosport

Thanks Magnus

Turbosport

Anyone got anything for this ECU no matter how rough ?

Vectra 2.5 litre V6 (C25XE) 95 Bosch Motronic 2.8 0 261 203 080 90 357 990 XEBM3080

Also anyone knwo where I can get the original BIN from ?

Cheers

Turbosport

sorry email clint@turbosport.co.uk

Turbosport

Send me the .bin and I will see if I have an xdf file, I have created most xdf's required for pectel.

Turbosport

Hi is anyone actively working on these ECU's who wants to team up ?

Turbosport

Often ECU depending values like rev limit are read into faster RAM then checked by the running program so the ROM tracing wont help at all, in this case trying to find a non existant needle in a haystack. HOWEVER..... most ROM's have an area that is only used for map values, often grouped by type i....

Turbosport

Sorry Magnus :oops: I meant on the right hand side having the ability to switch to a view which can show the relative values of the data so if one was hex FF the bar would be 100% if the next one was 00 no bar would show. Also the ability to copy the cursor location so once you found a table you can...

Turbosport

Anyoine done any work on a Euro Ford Mondeo ECU code RAID ?

Turbosport

Marcus, can we add in a second view in the hex editor so you can flip between assci and a vertical block which height corresponds to the location value, this will make finding small maps very easy, we would need to switch the blocks between 8 and 16 bit also.

Keep up the good work my friend.
Clint

Turbosport

Magnus, just thought it may be a good idea to add support fo Innovate products, load of people using them and would really push Tunerpro forward in my opinion. The good thing is they have an windows SDK information found here: http://www.innovatemotorsports.com/support.php Would be great to be able ...

Turbosport

Thanks Mungus, it make live mapping a lot easier

Turbosport

Probably a nightmare to impliment but a lot of DIY tuners have the techedge unit, Justin over a TWEBLOG does a standalone logger, it would be great to be able to interface this with Tunerpro so you can see what load site your working on live.

Regards
Clint

Turbosport

You said above that:

In graphing mode, pressing Ctrl + '+' and Ctrl + '-' or NUMPAD + and NUMPAD - increments the cur sel.

I thought you ment it did it live (changes it in the emulator) like dragging does?

Turbosport

Pressing enter to enable the cell highlighted (not the one below), once value changed pressing enter will update the emulator. In Graph mode using the up down keys should update the emulator just like dragging the load site does. Why should pressing enter "enable" the current cell? Typing...

Turbosport

Pressing enter to enable the cell highlighted (not the one below), once value changed pressing enter will update the emulator.

In Graph mode using the up down keys should update the emulator just like dragging the load site does.

Turbosport

Thanks Magnus email sent.

Turbosport

I think I am making the changes to the right bit of the bin as the rest of the stack is all empty.

Should I be able to directly emulate the 8k bin without stacking?

Can I send you the bin and xdf ? I have tried everything I can think of.

Turbosport

I am having trouble where when I change an item in a table or a graph its not getting changed in the emulator. I change the item in the table, the Emulator status goes green and says 'Upload Success' The changes are not made however, if I do a verify emu against current bin it fails with 'Verify Fai...

Turbosport

BTW I have got the emulator working by stacking an image into a 27C256 32K chip if I load a single image of this at 4000 HEX leaving 0000 02000 and 06000 blank.

Should I be able to directly emulate the 8K ROM ?

Turbosport

I have spent a lot of time searching for the answer to this so i am sorry if its been answered before. I have a 27C64 EPROM from my ECU that i wish to emulate using the Ostrich. Some Info: The resultant DOS file size of the BIN is 8,192Kb The HEX size of the Code is 0000 - 1FFF = 2000 hex What shoul...

Turbosport

OK progress, if I download from the emulator from address E01C to FFFF then I get the correct file.

So I assume my file is only 1FE3 long (FFFF - E01C)

How do I get Tuner pro to emulate this file in the right piece of memory so the car will start ?

Turbosport

I have a bin from a 27C64 Chip, but it I send the bin to the emulator and read it back to a file the bin dosnt look anything like the original, so I think I may have my offsets wrong. In the XDF header I am using bin Size hex = 2000 Offset = 0000 When I download bin to file i set the Chip Size to 8k...

Turbosport

I have just also noticed that if I read the emulator back to file the contents are completely different to the original file.

Turbosport

Hi I am a little stuck, I have just started to play with the ostrich and tunerpro but I cant emulate a file correctly. I am trying to emulate a 27C64 I have read the chip in Intel Binary format and have sent the image to the ostrich and then verified it the car dosnt start, also if I read the emulat...

Turbosport

Do you want to try and work together on them ?

Turbosport

Any of the IAW 4 Series

Cosworth L1 L6 L8 P8

Fiat Tipo / Bravo / Coupe 16v / Coupe 16v turbo

Turbosport

Can you include support for Serial Ports up to 20 ?

Turbosport

Hi i have managed to flip them no problem but the data is taken from the wrong cells and you have to move the start and end to compensate, as per my second post.

Turbosport

Any news on this issue ?

Turbosport

Thanks Dex, if someone wants to drop me an email address I will send the definition and the bin file if required.

Turbosport

Any Weber ECu Defs ?

Turbosport

That worked fine for the Rows but the columns needed the start address changed from 1A7E to 1A84 this address is 4 values over from 1A7E and is a bit randon for my liking, it does however display and change the correct values. any ideas whay this might be ?

Turbosport

Having a bit of bother getting the X and Y axis correct on a new definition:

http://uploads.turbosport.co.uk/getpic3 ... 626221.gif

The X and Y axis are the wrong way around, is there anyway of flipping them over ?

TunerPro User Forum

Search found 48 matches

Lots of XDF files have lost line breaks.

xdf file not found

XDF for UK Calibra v6

Weber IAW04 - P8 ECU - Fiat etc

FORD - RAID

Hex Editor Views

Support for Innovate

Techedge Wideband 02 support

Re: Live update

Live update

Ostrich NOT emulating changes Build 4.14.0024.00

How do I emulate a 27C64

Help - Ostrich and TunerPro

Serial Port Support Extension

Ay One Have Weber IAW Definitions ?

Flipping the X and Y scales (or the main table)