TunerPro User Forum

Would be awesome to select tables in the 2D /3D viewer - like WinOLS. Much fast working on the XDF. A multiple selection would also be nice. 2 ways I missed. 1.) -> table defintion 1. line 0x0100 2. line 0x0104 3. line 0x0106 (constant offset) 2.) -> table defintion, start 0x0100, 6x6 map -> make th...

Any update her? A CSV -> XDL converter tool would be awesome!

Mangus wrote: ↑Mon Mar 11, 2019 1:42 pm I've got a half-assed implementation of a CSV importer

A CSV importer would be awesome! Do you see any timeline when you have finished it?

It's look like datacode you are tracing - for the tables it's useful to see if this table is read or not.

How can I support?

Any chance that the "playback speed" bug will be solved soon?

Wrong / non conversion factor. When you use the values "direct" then is 0 the smallest possible input. Run is this failure years ago when I used to limit the maximum in a fuel table - unfortunately TP doesn't shows you when you run into this limit. You raise or lower the value, you save it...

Table Access, look for code similar to this: push PSW push B push DPH push DPL mov DPH, RAM_77 mov DPL, RAM_78 mov A, R2 inc R2 setb PSW.3 movc A, @A+DPTR

Tested at 3 different pc.

It's a monitor bug...
http://forum.tunerpro.net/viewtopic.php?t=4555

But nobody cares...

I would be a great option to make some section in the tables.
A color marking (frame lines control?) would be enough.

Usage for different lambda correction values etc. pp.

Playback has no function. 50% or 2500 times faster, run time of the playback is the same... also tested if pause/play is needed to switch the speed, no difference. Today I measured the speed of the playback. 1s log file - 3s playback time. Doesn't matter which play speed is used. Any chance to get ...

View by parameter category you may looking for?

Use google and download the file

Mangus wrote:Why not define a scalar for exactly this purpose?

I understand it now.
Using a scalar and then playing with the alarm function...

/edit:
Ok... Bitmask XOR 1 result 0/1 is what I was looking for...

Multi Screen or Multi instance has also some issues you have to take car. Primary screen shows the pull down menu only, multi instance only impacting the first opened session - I guess some layer issues?! A nice feature would be to start recording when datastream is connected, that you can log the c...

Playback has no function. 50% or 2500 times faster, run time of the playback is the same... also tested if pause/play is needed to switch the speed, no difference.

I have a Ram_Cell, let's call it RAM_28. RAM_28.0 - RAM_28.7 are my flags. set RAM_28.0 means 0000 0001b = 1d set RAM_28.7 means 1000 0000b = 128d Both would lead to 1000 0001b = 129d 1000 0010b = 130d 1000 0011b = 131d The evaluation of this dec number is not easy possible - or I didn't find the ri...

I have some "flag registers" which I would like to show. 8 bits per flag, would be awesome to realize this somehow. The flag can be 1000 0000 or 0001 0111 for example - would be very nice when I could use a value binary. I would think easiest way would to allow to define a value as binary ...

It's 3 years old but TunerPro shows yellow message "Checksum updated" everytime you save something. Depending on the ECM you should look for the Checksum routine or at least for the DTC setting. When your DTC is 65535 (FF FFh) then you could look for internal DTC 1. (Bosch Motronic is work...

The monitor function seems to be a little bit buggy, possible that nobody used it before in this way. Datastream is working without any issue as long as I don't open the Monitor. History is also great :) When I playback a log file and I use the scrollable (is it the correct naming?) TunerPro doesn't...

My datastream went corrupt after a fixed amount of seconds. 11-17s depending on the baudrate and if I use the "Silent" Macro to stop reading the stream for some ms. I can produce this failure when I use a value which changes very fast. TPS signal or something else (some ram value which is ...

Open Realterm and listen the transfer

LC1 sends out B2 82 43 13 as header/footer and the lambda value in between.
Can't be more complicated with other Innovate stuff.

Plugin for what? LC1? Other Innovate stuff?

It would be enough when it would be possible to load 2 PlugIns at the same time - for each PlugIn a own ADX file and at the "first slot" you can but everything into Monitor or whatever or same Monitor/Dash for all. Only datastream related stuff is PlugIn related. 2 ports at one Plugin is p...

Nothing? Oha... and Manual is not very helpful to create a own, also with KWP1281 commands...

Change of cell equation is also not possible... this costs me 1 hour... jesus

Has somebody a ADX file for VW/Audi?
I'm looking for a file which I could use a start point for my own ADX file.

Thx for every help!