TunerPro User Forum

Do you have the rev limiter address?

Send me the ori file bin and i see what i can do

Are the maps have the same memory address?(miller software and tuner pro xdf)

You just need 27c256 chip,28sf512 doesnt work because you have to double-write the bin file.

Just multiplie the raw numbers with 0.352 and you will convert them in degrees BTDC.

probably tps is the reason use a multimeter to check the voltage.also check if the throttle opens at maximum

Right click on parameter and then uncheck "Use low range" box or change it down to 50.

Here you are

http://www.mediafire.com/download/4biix ... c20let.rar

Send me the ori file and i can make you the xdf.

Υou must be carefull to not set all maps with the same high-low ranges.

928GUY wrote:Got it..so that complicates the mission, because there are a # of BMW supplied ECUs, but I cant find XDFs for all of them.

Thanks.

Post the ori file(bin) here if you want and i will try to make the xdf file you want

Every single cpu has its own xdf file.

So,when you see 255 at cells means that this xdf is for another cpu with different address memories.

But there is a possibility for an xdf to match with 1 or 2 bins only when is for the same car,model etc.

I have got connection and I am emulating with it which is good.Just trying to set it up.I am trying to get 325 with 330cc injectors with turbo all dialled in.I have just about got it to start and idle but wont rev up without popping and banging(badly).I think it is the maf restricting it as it is s...

Hi I have got it all working now with car running.But now I am trying to see if it does map tracing in the bin file to see exactly where I am in the map,is this possible.I can see there is a tracing button but does not seem to do anything or I am doing lots wrong.Can anybody shed some light on this...

marcone wrote:Hi I have just purchased moates so I can tune my bmw 173 ecu and I dont know how to get started.Got it loaded so it is recognised on the tuner pro,But do I use like with chip/burn or is anoher process,can somebody help please.


MARC

Do you have the xdf file of your ecu?

An all around low cost solution is Οstrich 2.0 and of course Tuner Pro.
Don t forget to add an Innovate wideband,a good laptop and an eprom reader/writer!

No,you must always press upload.