TunerPro User Forum

Glenno

Six_Shooter wrote:Would that price include to Canada? (I'm assuming you're in the US.)

You are correct with your assumption. If you can provide me with an address I'll look into it for you? Thanks Glenno

Glenno

I don't know where to post these things. If needed please move. $225.00 mailed. Call Glenno 631-241-0686/ http://i148.photobucket.com/albums/s31/GlennoE/Crap/IMAG1646_zps143cd54c.jpg http://i148.photobucket.com/albums/s31/GlennoE/Crap/IMAG1647_zps6239c346.jpg http://i148.photobucket.com/albums/s31/G...

Glenno

This is where the onus is put on you to do some research, and find out what the different tables, scalers and flags do. Many are easy to figure out just from the names, some are not, but usually you don't need to worry about those ones. There are some good XDFs out there for the $0D code that in th...

Glenno

For us to be specific, you need to be too. ;) Different codes have some unique tables and settings in them. Because I know you're using a '7427 on a TPI/MPFI configuration, I can help a bit. You need to start by setting the cyl count, CPI/PFI bit correctly, and trans type/trans settings correctly. ...

Glenno

1) I currently have the emulator connected and have been able to seemingly download a file to and from the emulator. I was hoping to be able to open the file I downloaded from the emulator in order to see it but can't seem to find it or open it? 2) MAJOR NUISANCE: Once I start the engine and let it ...

Glenno

I checked the Vats and there is no check mark in the box. I am running that 32b xdf file. The problem with the figures I was getting before was that the numbers would look semi plausible and then one of the numbers in the map would be ten times what everything else was. I am wondering if somehow th...

Glenno

Yeah, that's the jumper I'm talking about. It looks correct. If it isn't you'll end up with a MEMCAL or CYL select error. At this point you should be able to start tuning, using the Ostrich. Hey six shooter how you doing? I've been away and busy with other things. Finally back to my project. I curr...

Glenno

Yeah, that's the jumper I'm talking about. It looks correct. If it isn't you'll end up with a MEMCAL or CYL select error. At this point you should be able to start tuning, using the Ostrich. If I can start tuning with the Ostrach how do I go about enriching the mixture. It gets blow torch hot at th...

Glenno

Six_Shooter wrote:No, just look under it, from the side.

http://youtu.be/i8F36wUeVz4

Glenno

Six_Shooter wrote:The jumper should be under the knock filter board, near where your index finger is in the above pictures.

Do I need to separate the knock filter board from the rest of the memcal in order to see it? If so how do I do that without breaking anything?

Glenno

Yes, now you're connected just the way you should be. The AFR not changing doesn't apply to you, that has to do with a WBO2 input IIRC. You can change that gauge by right clicking on it and selecting a value that is applicable to you. But before you run it, there's some hardware checks that need to...

Glenno

Ok... Again, to test for a functioning cable The ALDL cable has to be disconnected from the vehicle, but the ALDL Xtreme box needs to be connected to the USB cable. It makes no difference if you unplug it from the ALDL connector attached to the vehicle, or unplugging the RJ45 type connector from th...

Glenno

Ok... Again, to test for a functioning cable The ALDL cable has to be disconnected from the vehicle, but the ALDL Xtreme box needs to be connected to the USB cable. It makes no difference if you unplug it from the ALDL connector attached to the vehicle, or unplugging the RJ45 type connector from th...

Glenno

Six_Shooter wrote:Update?

OK here is what I did tonight.

http://youtu.be/2D_b-vwrRMA

http://youtu.be/PY-aT3bBxY0

http://youtu.be/4RLezqRqfNQ

http://youtu.be/SZsTfqw2kzI

Glenno

Plug the USB cable into the ALDL Xtreme, THEN you will see the port for the cable in the device manager. With just the USB cable plugged into the back of the computer, the computer won't see anything on that USB port, it needs a device attached at the other end. When I say not connected to the car,...

Glenno

Six_Shooter wrote:Update?

http://youtu.be/YwMzszL3hK0

http://youtu.be/pj0C4-vreGg

Glenno

Update? Here is the news. I had some projects my wife put me to work on so I haven't been out there in the garage as I would like to be. In the interim my wife found the original manual that the guy provided me when I purchased the harness and computer. I had somehow misplaced the manual (the wife ...

Glenno

Six_Shooter wrote:Any news?

Hey Six-Shooter,

I didn't get a chance to get out to the garage last night and I'm going to be out of town for a few days so it looks like next week for me. I'll post up whats happening by mid week next week. Again I appreciate all your help and I'll be in touch soon.

Thanks Glenn

Glenno

Any news? OK here we go again. This is what 's happening at this point. http://youtu.be/aS_mnf2q9Y0 When you test for the cable do NOT have it plugged into the vehicle, you need to test the cable with nothing connected to the other end, just the USB connected to the computer. It likely won't be be ...

Glenno

Six_Shooter wrote:Any news?

OK here we go again. This is what 's happening at this point.

http://youtu.be/aS_mnf2q9Y0

http://youtu.be/-EHKEBLTGKI

Thanks again. Glenn

Glenno

To download a file from the moates site (only some people seem to have this issue and it seems to be a browser setting), right click on the file you want to save, then use the "save link as..." or "save target as..." option. Try to lok for a file that has "0D", or your...

Glenno

To download a file from the moates site (only some people seem to have this issue and it seems to be a browser setting), right click on the file you want to save, then use the "save link as..." or "save target as..." option. Try to lok for a file that has "0D", or your...

Glenno

Any news? Howz it? The news is this. I was having trouble loading my site key into Tuner Pro RT for a while now. Long story short the TP-RT version I had loaded was a 4.14 and kind of out of date. I was instructed by Mark from tuner pro to download TP-RT version 5.0. I did that today and I now have...

Glenno

Again, one video at a time... So here are the things I tried to do tonight. Does any of it seem to be working correctly? Thanks Glenn http://youtu.be/MgIYxlvl0og Yes that is all connected correctly, the video where the BJYM_0D bin was loaded and showed the proper CEL function at key verified the Os...

Glenno

No problem, we all were where you are once, and I know how it can be a bit daunting and frustrating at first, especially when you're not sure how to get everything set up. The fear of damaging something is high. Usually though at this stage it would be very difficult to really damage something. Thi...

Glenno

I'm going to comment on one video at a time, so if I say something responding to o9ne video, then change something later on, just ask for clarification, if something doesn't make sense. Great idea making videos BTW. If you can view these videos I made maybe you can better see what I’m trying to do....

Glenno

Since you are not using a manual tranny, I wonder why your suppler decided to use that PCM. It's just adding more complications and confusion for a first time tuner. :? Think of the ostrich as an EPROM, it is simply there to hold the bin file. The great thing about the Ostrich, being an EPROM Emula...

Glenno

Since you are not using a manual tranny, I wonder why your suppler decided to use that PCM. It's just adding more complications and confusion for a first time tuner. :? Think of the ostrich as an EPROM, it is simply there to hold the bin file. The great thing about the Ostrich, being an EPROM Emula...

Glenno

if you are in limp-home mode, and it's starting to sound like it, that would explain most if not all of the problems you're having. assuming you have a computer controlled cooling fan, does it attempt to turn on even at low coolant temps? That ECM in stock form does not control a fan. It sounds lik...

Glenno

robertisaar wrote:if you are in limp-home mode, and it's starting to sound like it, that would explain most if not all of the problems you're having.

assuming you have a computer controlled cooling fan, does it attempt to turn on even at low coolant temps?

No electric fans.

Glenno

http://i148.photobucket.com/albums/s31/GlennoE/Jeep%20Electrical/JeepMoates008.jpg http://i148.photobucket.com/albums/s31/GlennoE/Jeep%20Electrical/JeepMoates007.jpg http://i148.photobucket.com/albums/s31/GlennoE/Jeep%20Electrical/JeepMoates006.jpg http://i148.photobucket.com/albums/s31/GlennoE/Jee...

Glenno

Jeep TPI wires and connection points. Computer Service # 16196395 Other #’s 86BJLHK533013467 http://i148.photobucket.com/albums/s31/GlennoE/Jeep/DSC00271.jpg Main Computer Power 12 Volt 24/7 http://i148.photobucket.com/albums/s31/GlennoE/Jeep/DSC00256.jpg Computer Ground & O2 Ground http://i148....

Glenno

That PCM is for a mid '90s TBI truck. Are you positive that's the service number? From your description of how the engine is running, it sounds like it is in Limp Home Mode (LHM). When you turn the key on, before starting it, does the CEL come on, flash off once and then stay on until started or do...

Glenno

Very long story in a nut shell: I built a 1990 Jeep Wrangler YJ with a 5.7L Chevy engine. I bought a doner car for the TPI system which was a 1987 IROC Camaro Z. I bought a custom wire harness from a now nonexistent company called (CustomEFI). The harness was built to suit the options I wanted to us...

Glenno

You're ahead of me. I'm working with Ostrich 2.0, ALDU1, G3, and a Burn 2.
TPI conversion with a 16196395 ECU. Can't seem to make anything connect, read, interpret, what have you. Let me know what you learn, I'll research and brain storm with you. Thanks

TunerPro User Forum

Search found 35 matches

I have something for sale?

Emulation Moates Ostrich 2 Help please

No Data at ALDL connector.