TunerPro User Forum

If I could delete the post, I would. I found that my thinking was faulty and it is actually possible to hide things from yourself when you get to a certain age. Everything works as it should, Pocket Programmer is stand alone but uses TunerPro as the source and destination for the bins to load. Someh...

I have tried searching relative to the above subject but nothing seems to relate to my issue. I have an old Gateway Solo notebook running Win98 which is my garage computer. It is only used as a display for a multimeter and as a chip reader and writer with Tuner Pro RT version 4.x. No internet connec...

I tried several searches and this at least mentions the Pocket Programmer which is where my question lies. Short background story: I have a Pocket Programmer 2, which connects to the printer port on an old win98 Gateway Solo notebook computer. This computer runs TunerPro 4.x and has no internet capa...

At the risk of looking like a Dumas, are Tunercat definitions convertible to the TunerPro format? I tried searching and many topics show up but not what I need to know, or I do not understand? My version is 4.14 if that makes a difference. What I have been looking for is the 5B2.xdf definition to ex...

I know this is resurrecting a thread from the distant past, but I cannot seem to find the .xdf for the $5B2 Robert kindly modified and supplied to me back then. I do not see this in the chart and an online search brought me back here. The modified .adx still works perfectly but I am trying to decode...

Thank you all. I sent the zipped file to the email address. I did not create the file.

First off, I thank you for the reply. two potential causes: cable itself(i'm not fond of the 2-transistor, i built 2, neither worked half the time) silence command you may need to command a mode 8 to get the BCM to STFU so you can get info from the PCM. > I must admit I have read several posts menti...

Newbie first post. I have the 1228253v03 definition file mask $5B2. This is a 1990 Buick Reatta, 3800 LN3 engine. I made a 2-transistor cable and TunerPro RT v4.14 shows the ALDL is connected, but no data shows and packet error continually ramps upwards. I tried the hyperterminal test for com 1 and ...