Search found 38 matches
- Fri Apr 05, 2024 12:32 pm
- Forum: Bosch
- Topic: Car dumping fuel
- Replies: 2
- Views: 591
Re: Car dumping fuel
Maybe Found the issue. The camshaft sensor wasn't connected properly. Will fix it and update
- Thu Apr 04, 2024 11:41 pm
- Forum: Bosch
- Topic: Motronic ME2.1 - Mercedes 2.3L Kompressor M111 Questions
- Replies: 4
- Views: 6001
Re: Motronic ME2.1 - Mercedes 2.3L Kompressor M111 Questions
Hello It´s a work in progress. I have been comparing with Punto ME2 damos. Which map do you need? Thanks for replying I'm looking for deceleration fuel cut maps and idle ignition maps. I don't think me2 got deceleration ignition map. Right? Let me know if you need addresses for fuel or ignition pt ...
- Mon Apr 01, 2024 12:12 pm
- Forum: Bosch
- Topic: Motronic ME2.1 - Mercedes 2.3L Kompressor M111 Questions
- Replies: 4
- Views: 6001
Re: Motronic ME2.1 - Mercedes 2.3L Kompressor M111 Questions
Hi so did anyone find a definition file or mappack? I found fuel and ignition timing but nothing else
- Thu Mar 21, 2024 10:03 am
- Forum: Bosch
- Topic: 153 revlimiter hysterisis address
- Replies: 0
- Views: 880
153 revlimiter hysterisis address
Hi everyone.
Regarding 153 ecu
The revlimiter found on the xdfs is working but I was wondering about the hysterisis regarding it. The 62c4 address for revlimiter primary is followed by 03. And so does the other revlimiter at 62f0. Can that byte 003 be the hysterisis?
Thanks
Regarding 153 ecu
The revlimiter found on the xdfs is working but I was wondering about the hysterisis regarding it. The 62c4 address for revlimiter primary is followed by 03. And so does the other revlimiter at 62f0. Can that byte 003 be the hysterisis?
Thanks
- Thu Mar 21, 2024 9:57 am
- Forum: Bosch
- Topic: Car dumping fuel
- Replies: 2
- Views: 591
Re: Car dumping fuel
Thanks for the reply. The blue sensor is the one that was replaced ( going to ecu ) problem remains
- Wed Mar 20, 2024 12:08 am
- Forum: Bosch
- Topic: Car dumping fuel
- Replies: 2
- Views: 591
Car dumping fuel
Hi everyone
Car is m20b28( modified engine)
Running 405 ecu and wiring( I know it's for M50)
The car drives perfectly when the chip is first installed then after 30 minutes it goes super rich
Checked the temperature sensor it works normal
Any suggestions???
Car is m20b28( modified engine)
Running 405 ecu and wiring( I know it's for M50)
The car drives perfectly when the chip is first installed then after 30 minutes it goes super rich
Checked the temperature sensor it works normal
Any suggestions???
- Tue Mar 05, 2024 7:26 am
- Forum: Bosch
- Topic: 413 Burble/Pops and Bangs
- Replies: 5
- Views: 1678
Re: 413 Burble/Pops and Bangs
Tried using idle ignition angle 0(rawdata) at the last 2 values? works for getting some pops
- Fri Jan 12, 2024 3:21 am
- Forum: Bosch
- Topic: Bimmer tuning tools software
- Replies: 1
- Views: 2928
Re: Bimmer tuning tools software
Solved.
Had to use VPN since It want available for my country
Had to use VPN since It want available for my country
- Fri Jan 12, 2024 3:20 am
- Forum: General Tuning Discussion
- Topic: Bimmer tuning tools
- Replies: 1
- Views: 1351
Re: Bimmer tuning tools
Solved.
Had to use VPN since It want available for my country
Had to use VPN since It want available for my country
- Thu Jan 11, 2024 11:04 am
- Forum: General Tuning Discussion
- Topic: Bimmer tuning tools
- Replies: 1
- Views: 1351
Bimmer tuning tools
Hi I asked this before but it seems that I used the wrong section of the site.
Bimmer tuning tools website had been showing coming soon on all there products. How can I buy the software does anyone know?
Thanks in advance
Bimmer tuning tools website had been showing coming soon on all there products. How can I buy the software does anyone know?
Thanks in advance
- Thu Jan 04, 2024 12:21 pm
- Forum: Bosch
- Topic: 2 revlimiters??
- Replies: 0
- Views: 2014
2 revlimiters??
Hi regarding Bosch 400 to 413 I noticed 2 revlimiters ( 6500 the one usually modified). And another one (6000 rpm. ). What's the other one for?
Please let me know if I understand it correctly in the image below Any help is greatly appreciated
Thanks in advance
Please let me know if I understand it correctly in the image below Any help is greatly appreciated
Thanks in advance
- Fri Dec 29, 2023 12:22 am
- Forum: Bosch
- Topic: M50 402 disable lambda
- Replies: 5
- Views: 5789
Re: M50 402 disable lambda
After trying for a long time I noticed that lambda adaptation can only change 5%in 402 so disabling it isn't that important
- Sun Dec 24, 2023 3:17 am
- Forum: Bosch
- Topic: M50 402 disable lambda
- Replies: 5
- Views: 5789
Re: M50 402 disable lambda
Hi found those lambda Maps for 402
7870 6*1
787e 6*1
788a 4*1
7894 4*1
789e 4*1 But lambda off isn't working.
Any suggestions ?
7870 6*1
787e 6*1
788a 4*1
7894 4*1
789e 4*1 But lambda off isn't working.
Any suggestions ?
- Tue Dec 19, 2023 2:00 pm
- Forum: Bosch
- Topic: Bimmer tuning tools software
- Replies: 1
- Views: 2928
Bimmer tuning tools software
Hi everyone.
I'm trying to purchase ms45 quickflash from the original website for a year now but it always says coming soon.
Is there a way I can purchase the original software somewhere else?
Thanks in advance
I'm trying to purchase ms45 quickflash from the original website for a year now but it always says coming soon.
Is there a way I can purchase the original software somewhere else?
Thanks in advance
- Mon Nov 20, 2023 1:18 pm
- Forum: Bosch
- Topic: Coding for creating a hardcut revlimiter
- Replies: 0
- Views: 4791
Coding for creating a hardcut revlimiter
Hi I knew recently that there's a code to insert instead of an ff string to get hardcut revlimit hysterisis 32. And it works on all motronic ecu. Does anyone know if its true and what is it ? If not can anyone tell me where I can get hardcut hysterisis and softcut hysterisis and revlimiter for 402 e...
- Sun Oct 01, 2023 7:40 am
- Forum: Bosch
- Topic: Double size chip map switch
- Replies: 5
- Views: 3588
Re: Double size chip map switch
only up Hi is there a way to switch between 2 stacked bins on a double sized chip? (2 files 256 on a 512 chip) Chips typically have memory addresses associated with different locations within the chip. You may need to specify the memory address or range of addresses associated with each bin to acce...
- Thu Sep 14, 2023 12:21 pm
- Forum: Subaru
- Topic: Best tool for tuning Subaru from 1996 to 2023
- Replies: 2
- Views: 4661
Re: Best tool for tuning Subaru from 1996 to 2023
Ok thanks for your reply brother
- Tue Sep 12, 2023 1:34 pm
- Forum: Subaru
- Topic: Best tool for tuning Subaru from 1996 to 2023
- Replies: 2
- Views: 4661
Best tool for tuning Subaru from 1996 to 2023
Hi I'm searching for a tool that covers all Subaru ecu. Can anyone help with a recommendation for a tool?
Thanks
Thanks
- Sun Aug 13, 2023 8:12 am
- Forum: Bosch
- Topic: motronic 405 or 400 fuel at deceleration and lambda adaptation
- Replies: 0
- Views: 4803
motronic 405 or 400 fuel at deceleration and lambda adaptation
Hi does anyone know the addresses for fuel at declaration and lambda adaptation control tables for 405 ecu.
Thanks in advance
Thanks in advance
- Sun Aug 13, 2023 8:10 am
- Forum: Bosch
- Topic: Me9.2 pops problem
- Replies: 1
- Views: 2112
Re: Me9.2 pops problem
Pops and crackle on throttle release while driving is achieved but not when stationary.
If someone knows how I'll be happy to submit mod file
If someone knows how I'll be happy to submit mod file
- Tue Aug 08, 2023 6:07 am
- Forum: Bosch
- Topic: Me9.2 pops problem
- Replies: 1
- Views: 2112
Me9.2 pops problem
Hi my freinds Im trying with this file for 2 days now and cant get pops on throttle release. Its 545i e60 me9.2 Hw: 07544610 Swver: 10373730376 Hw ver: 0261209010 Sw upg: 07561124 Got power and fuel good enough but not getting pops Can anyone tell me the addresses of the table or have an xdf or damo...
- Tue Jul 25, 2023 4:03 am
- Forum: Bosch
- Topic: BMW Bosch motronic 403 Lambda feedback
- Replies: 5
- Views: 10274
Re:
https://preview.ibb.co/ha2QOw/Sans_titre1.png Set all values to 0 in this table will turn off O2 regulation and adaptatives, did some tests this morning and it works ;) Hi how are you I know that you put a lot of effort in creating that xdf and i noticed that the addresses cover the 2 chips for 403...
- Tue Jul 18, 2023 11:21 am
- Forum: Bosch
- Topic: BMW Bosch motronic 403 Lambda feedback
- Replies: 5
- Views: 10274
Re: BMW Bosch motronic 403 Lambda feedback
- Fri Jul 14, 2023 6:45 am
- Forum: Bosch
- Topic: BMW Bosch motronic 403 Lambda feedback
- Replies: 5
- Views: 10274
- Thu Jul 13, 2023 2:41 pm
- Forum: Bosch
- Topic: 153 Bosch pops on throttle release
- Replies: 0
- Views: 4452
153 Bosch pops on throttle release
Hi usually theres no problems with the issue of pops but theres a car thats not working well with this. The pops are only happening when slight throttle is applied. The ignition timing low load is set to -13.96( 0 no conversion ) at low load first colomn from 1500 to 6500. And idle ignition timing i...
- Thu Jul 13, 2023 2:09 pm
- Forum: Bosch
- Topic: Double size chip map switch
- Replies: 5
- Views: 3588
Re: Double size chip map switch
So pin number 1 (vpp programming voltage on 27c256) is (a15. Address 15 on 27c512. ) is that what you recommend using as a switched 5v ?
- Thu Jul 13, 2023 2:01 pm
- Forum: Bosch
- Topic: Double size chip map switch
- Replies: 5
- Views: 3588
Re: Double size chip map switch
Thanks a lot. I will try that tomorrow
- Wed Jul 12, 2023 12:33 am
- Forum: Bosch
- Topic: Double size chip map switch
- Replies: 5
- Views: 3588
Double size chip map switch
Hi is there a way to switch between 2 stacked bins on a double sized chip? (2 files 256 on a 512 chip)
- Mon Jun 26, 2023 6:07 am
- Forum: Other Car/Truck Makes
- Topic: E46 abs module programming
- Replies: 0
- Views: 4002
E46 abs module programming
Hi everyone
Im trying to access the abs module programming of 2003 e46 in order to change brakes pressure to help with drifting
Did anyone try it before and can help?
Best regards
Im trying to access the abs module programming of 2003 e46 in order to change brakes pressure to help with drifting
Did anyone try it before and can help?
Best regards
- Sun May 07, 2023 9:56 am
- Forum: Bosch
- Topic: 403 temperature fuel enrichment problem
- Replies: 2
- Views: 2596
Re: 403 temperature fuel enrichment problem
Hi sorry i was busy due to the start of race season Injector constant was put at 18500( raw data) (varies depending on the injectors used. Mine were volvo s40t on m50 turbo) Xdf address was 6a16 (16bit) Hi, What did you put as injector constant value ? Can you show us the parameter of your table XDF...
- Thu May 04, 2023 3:07 pm
- Forum: Bosch
- Topic: 403 temperature fuel enrichment problem
- Replies: 2
- Views: 2596
403 temperature fuel enrichment problem
Hi everyone
i have a problem with a 403 ecu mixture getting very rich after engine warms up (using very big injectors but decreased injector constant so the tables are manageable)
Is there a table related to fuel enrichment and engine temperature?
Thanks in advance
i have a problem with a 403 ecu mixture getting very rich after engine warms up (using very big injectors but decreased injector constant so the tables are manageable)
Is there a table related to fuel enrichment and engine temperature?
Thanks in advance
- Tue May 02, 2023 9:30 am
- Forum: Bosch
- Topic: M50 402 disable lambda
- Replies: 5
- Views: 5789
Re: M50 402 disable lambda
Tried disabling all lambda adaptation tables using winols. Car turns off after a fraction of a second . Did anyone have this issue?
- Thu Apr 13, 2023 9:23 pm
- Forum: Bosch
- Topic: 506 revlimit hysteresis and ignition cut instead of fuel cut
- Replies: 3
- Views: 3851
Re: 506 revlimit hysteresis and ignition cut instead of fuel cut
Thanks for your reply olafu
Ill keep trying and will let you know if i have any success with that
Also im searching for the hysteresis but no success yet
Ill keep trying and will let you know if i have any success with that
Also im searching for the hysteresis but no success yet
- Mon Mar 27, 2023 12:23 pm
- Forum: Bosch
- Topic: 506 revlimit hysteresis and ignition cut instead of fuel cut
- Replies: 3
- Views: 3851
506 revlimit hysteresis and ignition cut instead of fuel cut
Hi. Theres a problem that im struggling with and would be very thankful if someone have a solution Running 506_soft965 on 413 red label Revlimit seems to be soft limit (fuel cut ) set 7000 rpm Fuel and ignition tables limit 6500 rpm Ignition dwell limit 7000 rpm The question is. Im not finding a way...
- Sat Feb 25, 2023 12:48 am
- Forum: Bosch
- Topic: NEW BMW 506 xdf
- Replies: 22
- Views: 23773
Re: NEW BMW 506 xdf
The 506 xdf is updated on the tunerpro website. If there's a specific table that you need let me know and ill help as much as i can
Best regards
Adham al khechen
REVUP TUNING
Lebanon
Best regards
Adham al khechen
REVUP TUNING
Lebanon
- Thu Dec 29, 2022 2:27 pm
- Forum: Bosch
- Topic: Vanos tuning bosch 413
- Replies: 2
- Views: 3280
Re: Vanos tuning bosch 413
This "Vanos dwell table" in XDF from Tunerpro site has nothing to do with vanos. It's injection timing table. M3.3.1 vanos can be full advanced or full retarded, it has no closed loop control like Siemens ecu in M52 engine. Vanos solenoid valve is also different design in M52 to suit clos...
- Thu Dec 08, 2022 11:16 am
- Forum: Bosch
- Topic: Vanos tuning bosch 413
- Replies: 2
- Views: 3280
Vanos tuning bosch 413
Hi
does anyone know what exactly the values at the vanos dwell tables mean? It cant be cam angle since for m52 its between 85 and 110 but the tables go to 255 .
Thanks in advance .
does anyone know what exactly the values at the vanos dwell tables mean? It cant be cam angle since for m52 its between 85 and 110 but the tables go to 255 .
Thanks in advance .
- Thu Sep 29, 2022 12:31 pm
- Forum: Bosch
- Topic: Tuned file for stock M50B25TU with red label 413 dme
- Replies: 7
- Views: 13520
Re: Tuned file for stock M50B25TU with red label 413 dme
Hi freinds. Please note that you cant just use any file on your car even if ""stage1"" every engine is different. A file working great on another car might cause knock on your car . Start with an emulator some knowlage on how the systems work and a knock monitor. (Preferably with...