TunerPro User Forum

what do you mean by "old school tune"? and hit Ctrl + F2... do you see anything like this: created 8/21/2009 by Robert Saar. latest changes made 02/16/2010 ?? I see what you mean Robert there is no author on the header page but I got the 3400 XDF from Shane Wethington off of this forum an...

Exactly I want to tune by WBO2 and lap time and know what I changed in the program effected the out come with little or no ECU adjustments. I'm just not sure of the best way to keep $A1 in open loop and thought some body might have done it already saveing me a lot of time.

I'll try again at home on my lap top it always works. Thanks for the help. I agree on the carb tuning but it will be nice to adjust the timing or the fuel map and see the results and not wonder if the program is hiding some thing from me. there is always the risk of going to far with no net but no p...

didn't see anything with Ctrl+F2

you know through some timing at it bigger jets change the metering valves instead of the ecu adjusting after the fact

XDF is $a1. I am running in closed loop now and the car runs fine I just feel like I could get some more ponies wiith an old school tune.

Any body tried running a 7730 with $A1 locked in open loop? I road race my 3400 cavy so I'm not to worried about perfect idle or mileage just easy to tune and go fast its on WFO most of the time any ways. I think I can raise the "min coolant temp for closed loop" to the 159 deg C and it wi...

Any body mess with tunning for E85?

Thanks that will make it so much easier

I need a XDF and an ADS for $A1 for a 7730 ecm. I had it but my Hard drive crashed and the site where I got it no longer has it.

2004 3400. m.steffee@hotmail.com

No nothing yet.

Does anybody have a good bin for this swap I am running S&S headers and 69mm tb I could use a head start. racing season starts in March,

I finally found an ads. file that works on my 1227730 ECM running $A1. Heres the site where i found it. Give it a try. http://www.v6z24.com/jbodyforum/tuning- ... d54f8d.htm

Wow I feel your pain that is almost exactly like my problems without the lock up. I was using the Mastach on an old SI winbook using 2000 with freescan and it did the no connect thing then I switched to a Z1 winbook with 2000 and tunerpro RT and the Xtream ALDL with no connect. I even tried freescan...

Yes its USB and you can find it on moates.net. the mustach was rs 232 but didn't work either. my Z1 winbook sees the hardware when I plug into the aldl connector but won't communicate with the ECM. I should add that I am using the moates chip adapter also.

Just to let you know I found an A1 ads on the general forum " thanks Moonwell." But that hasn't worked either. I'll keep trying I figure its something stupid that I am missing

I'm having the same problem but this didn't help. still won't connect.

Hey guys I have been tuning for some time using GMPCM but they have disapeared so I moved to Tuner Pro RT. I have had a few issues but I think I am getting there except in the ALDL department. I am running a Chevy 3100 V6 on a 1227730 ECM and the $A1 mask its in a 1991 Cavalier Z24. I have tried usi...